Products

PPGL - GALVALUME ® Painted Sheet

This is a process in which the surface of the sheet is coated with acrylic paint varieties to increase the corrosion resistance of GALVALUME® sheet and achieve a more aesthetic appearance.

PPGI - Galvanized Painted Sheet

This is a process where the sheet surface is coated with acrylic paint types to increase the corrosion resistance of the galvanized sheet and to obtain a more aesthetic appearance.
PPGI- PPGL Paint Line 1 Paint Line 2 Paint Line 3
Material Thickness 0.25 - 1.50 mm 0.25 - 1.20 mm 0,25-1,20 mm
Width 900 – 1300 mm 900 – 1300 mm 900 – 1300 mm
Coil Inner Diameter 508 mm 508 mm 508 mm
Maximum Roll Weight 11 Tons 11 Tons 11 Tons
Click for Workable Quality Detail Table  
WORKABLE QUALITIES
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING
 (TS EN 10346 / TS EN 10169)

No
Steel Quality Steel Number Coating Type Chemical Composition ( % ) Max Yield Strength
( N/mm2 )
Tensile Strength
( N/mm2 )
Elongation 
( % ) Min
C Si Mn P S
1 DX51D 1.0917 +Z 0,18 0,50 1,20 0,12 0,045 * 270-500 22
+AZ
2 DX52D 1.0918 +Z 0,12 0,50 0,60 0,10 0,05 140 - 300 270 - 420 26
+AZ
3 DX53D 1.0951 +Z 140 - 260 270 - 380 30
+AZ
4 DX54D 1.0952 +Z 120 - 220 260 - 350 36
+AZ
5 S220GD 1.0241 +Z 0,20 0,60 1,70 0,10 0,045 Min 220 Min 300 20
+AZ
6 S250GD 1.0242 +Z Min 250 Min 330 19
+AZ
7 S280GD 1.0244 +Z Min 280 Min 280 18
+AZ
8 S320GD 1.0250 +Z Min 320 Min 360 17
+AZ
9 S350GD 1.0529 +Z Min 350 Min 390 16
+AZ
10 S390GD 1.0238 +Z Min 390 Min 460 16
+AZ
11 S420GD 1.0239 +Z Min 420 Min 480 15
+AZ
12 S450GD 1.0233 +Z Min 450 Min 510 14
+AZ
13 S550GD 1.0531 +Z Min 550 Min 560 -
+AZ
 
Note: Apply TS EN 10346 standart for details and explanations
 
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING
 ( TS EN 10346 / TS EN 10169)

No
Steel Quality Type Steel Quality Coating Type Chemical Composition ( % ) Max Yield Strength  
( N/mm2)
Yield Strength
( N/mm2 )
Tensile Strength
( N/mm2)
Tensile Strength
( N/mm2)
Elongation 
( % ) Min
C Si Mn P S Ti
1 CS CS Type A +Z 0,10 - 0,60 0,030 0,035 0,025 25/55 170-380 - - -
2 CS CS Type B +Z 0,02-0,15 - 0,60 0,030 0,035 0,025 30/55 205-380 - - -
3 CS CS Type C +Z 0,08 - 0,60 0,100 0,035 0,025 25/60 170-410 - - -
4 SS 33 (230) +Z 0,20 - 1,35 0,10 0,040 0,03 Min 33 Min 230 Min 45 Min 310 20
5 SS 37 (255) +Z 0,20 - 1,35 0,10 0,040 0,03 Min 37 Min 255 Min 52 Min 360 18
6 SS 40 (275) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 40 Min 275 Min 55 Min 380 16
7 SS 50 (340) Class 1 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 65 Min 450 12
8 SS 50 (340) Class 2 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 - - 12
9 SS 50 (340) Class 3 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 70 Min 480 12
10 SS 50 (340) Class 4 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 60 Min 410 12
11 SS 55 (380) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 55 Min 380 Min 70 Min 480 11
12 SS 60 (410) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 60 Min 410 Min 70 Min 480 10
13 SS 70 (480) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 70 Min 550 Min 80 Min 550 9
14 SS 80 (550) Class 1 +Z 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 -
15 SS 80 (550) Class 2 +Z 0,02 - 1,35 0,10 0,050 0,02 Min 80 Min 550 Min 82 Min 570 -
16 SS 80 (550) Class 3 +Z 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 3
 
Note: Apply ASTM A653 standart for details and explanations
 
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING
GALVALUME® - ASTM A792 / TS EN 10169)

No
Steel Quality Type Steel Quality Coating Type Chemical Composition ( % ) Max Yield Strength
( N/mm2)
Yield Strength
( N/mm2 )
Tensile Strength
(N/mm2)
Tensile Strength
( N/mm2 )
Elongation
( % ) Min
C Si Mn P S Ti
1 CS CS Type A +AZ 0,10 - 0,60 0,030 0,035 0,025 25/55 170-380 - - -
2 CS CS Type B +AZ 0,02-0,15 - 0,60 0,030 0,035 0,025 30/55 205-380 - - -
3 CS CS Type C +AZ 0,08 - 0,60 0,100 0,035 0,025 25/60 170-410 - - -
4 SS 33 (230) +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 33 Min 230 Min 45 Min 310 20
5 SS 37 (255) +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 37 Min 255 Min 52 Min 360 18
6 SS 40 (275) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 40 Min 275 Min 55 Min 380 16
7 SS 50 (340) Class 1 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 65 Min 450 12
8 SS 50 (340) Class 2 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 - - 12
9 SS 50 (340) Class 4 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 60 Min 410 12
10 SS 60 (410) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 60 Min 410 Min 70 Min 480 10
11 SS 70 (480) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 70 Min 550 Min 80 Min 550 9
12 SS 80 (550) Class 1 +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 -
13 SS 80 (550) Class 2 +AZ 0,02 - 1,35 0,10 0,050 0,02 Min 80 Min 550 Min 82 Min 570 -
14 SS 80 (550) Class 3 +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 3
 
Note: Apply ASTM A792 standart for details and explanations

  • Tezcan A.Ş, which aims to grow vertically and continues its investments for integration with this understanding, continues to produce 1.3 million tons of flat products per annum and produces high added value products. Since its foundation, it has become one of the leading companies in its sector with the investments it has spent its life with, its conformity with global quality standards, the use of latest technology equipment and its rapidly evolving structure.

©2018 - Tezcan Galvaniz - ALL RIGHTS RESERVED.