Products

GL - Galvalume ® Sheet

The full hard material from the rolls is processed by GALVALUME® according to customer requirements after annealing in the continuous annealing zone on the GALVALUME ® line.

CRF → GL GALVALUME® Line
Material Thickness 0.25 – 2.00 mm
Width 800 – 1300 mm
Coil Inner Diameter 508 & 610 mm
Maximum Roll Weight 30 tons
   Click for Workable Quality Detail Table  
WORKABLE QUALITIES
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING
 (TS EN 10346)

No
Steel Quality Steel Number Coating Type Chemical Composition ( % ) Max Yield Strength
( N/mm2 )
Tensile Strength
( N/mm2 )
Elongation ( % ) Min
C Si Mn P S Ti
1 DX51D 1.0917 +Z 0,18 0,50 1,20 0,12 0,045 0,30 * 270-500 22
+AZ
2 DX52D 1.0918 +Z 0,12 0,50 0,60 0,10 0,05 0,30 140 - 300 270 - 420 26
+AZ
3 DX53D 1.0951 +Z 140 - 260 270 - 380 30
+AZ
4 DX54D 1.0952 +Z 120 - 220 260 - 350 36
+AZ
5 S220GD 1.0241 +Z 0,20 0,60 1,70 0,10 0,045 - Min 220 Min 300 20
+AZ
6 S250GD 1.0242 +Z Min 250 Min 330 19
+AZ
7 S280GD 1.0244 +Z Min 280 Min 280 18
+AZ
8 S320GD 1.0250 +Z Min 320 Min 360 17
+AZ
9 S350GD 1.0529 +Z Min 350 Min 390 16
+AZ
10 S390GD 1.0238 +Z Min 390 Min 460 16
+AZ
11 S420GD 1.0239 +Z Min 420 Min 480 15
+AZ
12 S450GD 1.0233 +Z Min 450 Min 510 14
+AZ
13 S550GD 1.0531 +Z Min 550 Min 560 -
+AZ
   
Note: Apply EN 10346 standart for details and explanations
   
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING 
(GALVALUME® - ASTM A792)

No
Steel Quality Type Steel Quality Coating Type Chemical Composition ( % ) Max Yield Strength
(N/mm2 )
Yield Strength
( N/mm2 )
Tensile Strength
( N/mm2)
Tensile Strength
( N/mm2 )
Elongation ( % ) Min
C Si Mn P S Ti
1 CS CS Type A +AZ 0,10 - 0,60 0,030 0,035 0,025 25/55 170-380 - - -
2 CS CS Type B +AZ 0,02-0,15 - 0,60 0,030 0,035 0,025 30/55 205-380 - - -
3 CS CS Type C +AZ 0,08 - 0,60 0,100 0,035 0,025 25/60 170-410 - - -
4 SS 33 (230) +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 33 Min 230 Min 45 Min 310 20
5 SS 37 (255) +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 37 Min 255 Min 52 Min 360 18
6 SS 40 (275) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 40 Min 275 Min 55 Min 380 16
7 SS 50 (340) Class 1 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 65 Min 450 12
8 SS 50 (340) Class 2 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 - - 12
9 SS 50 (340) Class 4 +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 60 Min 410 12
10 SS 60 (410) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 60 Min 410 Min 70 Min 480 10
11 SS 70 (480) +AZ 0,25 - 1,35 0,10 0,040 0,03 Min 70 Min 550 Min 80 Min 550 9
12 SS 80 (550) Class 1 +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 -
13 SS 80 (550) Class 2 +AZ 0,02 - 1,35 0,10 0,050 0,02 Min 80 Min 550 Min 82 Min 570 -
14 SS 80 (550) Class 3 +AZ 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 3
   
Note: Apply ASTM A792 standart for details and explanations
   

  • Tezcan A.Ş, which aims to grow vertically and continues its investments for integration with this understanding, continues to produce 1.3 million tons of flat products per annum and produces high added value products. Since its foundation, it has become one of the leading companies in its sector with the investments it has spent its life with, its conformity with global quality standards, the use of latest technology equipment and its rapidly evolving structure.

©2018 - Tezcan Galvaniz - ALL RIGHTS RESERVED.