Products

GI - Galvanized Sheet

The full hard material coming from the rolls is processed in a continuous annealing zone on the galvanized lines and zinc coated according to customer requirements after annealing.
 
CRF → GI Galvanized Line 1 Galvanized Line 2
Material Thickness 0.20 - 2.00 mm 0.20 - 3.00 mm
Width 800 – 1550 mm 800 – 1300 mm
Coil Inner Diameter 508 mm 508 & 610 mm
Maximum Roll Weight 25 tons 25 tons

Click for Workable Quality Detail Table  

WORKABLE QUALITIES

 

 

CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING
 (TS EN 10346)

No		 Steel Quality Steel Number Coating Type Chemical Compostion ( % ) Max Yield Strength
( N/mm2 )		 Tensile
Strength
( N/mm2 )		 Elongation
( % ) Min
C Si Mn P S Ti
1 DX51D 1.0917 +Z 0,18 0,50 1,20 0,12 0,045 0,30 * 270-500 22
2 DX52D 1.0918 +Z 0,12 0,50 0,60 0,10 0,05 0,30 140 - 300 270 - 420 26
3 DX53D 1.0951 +Z 140 - 260 270 - 380 30
4 DX54D 1.0952 +Z 120 - 220 260 - 350 36
5 S220GD 1.0241 +Z 0,20 0,60 1,70 0,10 0,045 - Min 220 Min 300 20
6 S250GD 1.0242 +Z Min 250 Min 330 19
7 S280GD 1.0244 +Z Min 280 Min 280 18
8 S320GD 1.0250 +Z Min 320 Min 360 17
9 S350GD 1.0529 +Z Min 350 Min 390 16
10 S390GD 1.0238 +Z Min 390 Min 460 16
11 S420GD 1.0239 +Z Min 420 Min 480 15
12 S450GD 1.0233 +Z Min 450 Min 510 14
13 S550GD 1.0531 +Z Min 550 Min 560 -

 

Note: Apply EN 10346 standart for details and explanations
 
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCT FOR COLD FORMING
(GALVANİZ - ASTM A653)

No		 Steel Quality Type Steel Quality Coating Type Chemical Composition ( % ) Max Yield Strength 
( N/mm2 )		 Yield Strength
( N/mm2)		 Tensile
Strength
( N/mm2)		 Tensile
Strength
( N/mm2 )		 Elongation
( % ) Min
C Si Mn P S Ti
1 CS CS Type A +Z 0,10 - 0,60 0,030 0,035 0,025 25/55 170-380 - - -
2 CS CS Type B +Z 0,02-0,15 - 0,60 0,030 0,035 0,025 30/55 205-380 - - -
3 CS CS Type C +Z 0,08 - 0,60 0,100 0,035 0,025 25/60 170-410 - - -
4 SS 33 (230) +Z 0,20 - 1,35 0,10 0,040 0,03 Min 33 Min 230 Min 45 Min 310 20
5 SS 37 (255) +Z 0,20 - 1,35 0,10 0,040 0,03 Min 37 Min 255 Min 52 Min 360 18
6 SS 40 (275) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 40 Min 275 Min 55 Min 380 16
7 SS 50 (340) Class 1 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 65 Min 450 12
8 SS 50 (340) Class 2 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 - - 12
9 SS 50 (340) Class 3 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 70 Min 480 12
10 SS 50 (340) Class 4 +Z 0,25 - 1,35 0,10 0,040 0,03 Min 50 Min 340 Min 60 Min 410 12
11 SS 55 (380) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 55 Min 380 Min 70 Min 480 11
12 SS 60 (410) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 60 Min 410 Min 70 Min 480 10
13 SS 70 (480) +Z 0,25 - 1,35 0,10 0,040 0,03 Min 70 Min 550 Min 80 Min 550 9
14 SS 80 (550) Class 1 +Z 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 -
15 SS 80 (550) Class 2 +Z 0,02 - 1,35 0,10 0,050 0,02 Min 80 Min 550 Min 82 Min 570 -
16 SS 80 (550) Class 3 +Z 0,20 - 1,35 0,10 0,040 0,03 Min 80 Min 550 Min 82 Min 570 3

 

Note: Apply ASTM A653 standart for details and explanations

  • Tezcan A.Ş, which aims to grow vertically and continues its investments for integration with this understanding, continues to produce 1.3 million tons of flat products per annum and produces high added value products. Since its foundation, it has become one of the leading companies in its sector with the investments it has spent its life with, its conformity with global quality standards, the use of latest technology equipment and its rapidly evolving structure.

©2024 - Tezcan Galvaniz - ALL RIGHTS RESERVED.